Homepage
            
           Greenhouse
     
     Products
        
Contacts
Galvanising Process                            Info

Copyright 2006 Ultra Building Products. All rights reserved.

The Process | Reaction
When the clean iron or steel component is dipped into the molten zinc (which is commonly at around 450°C) a series of zinc-iron alloy layers are formed by a metallurgical reaction between the iron and zinc. The rate of reaction between the steel and the zinc is normally parabolic with time and so the initial rate of reaction is very rapid and considerable agitation can be seen in the zinc bath. The main thickness of coating is formed during this period. Subsequently the reaction slows down and the coating thickness is not increased significantly even if the article is in the bath for a longer period of time. A typical time of immersion is about four or five minutes but it can be longer for heavy articles that have high thermal inertia or where the zinc is required to penetrate internal spaces. Upon withdrawal from the galvanizing bath a layer of molten zinc will be taken out on top of the alloy layer. Often this cools to exhibit the bright shiny appearance associated with galvanized products.

Post galvanizing treatment can include quenching into water or air cooling. Conditions in the galvanizing plant such as temperature, humidity and air quality do not affect the quality of the galvanized coating. By contrast, these are critically important for good quality painting.



Welcome To Ultra Building Products!

The Company is a diverse manufacturing enterprise based in Newtownstewart, County Tyrone, supplying quality products and services to a variety of industries including the Construction Industry, Farm, Home and Garden.

Ultra are specialists in Hot-dip, galvanising services.